ATIKA ASP 8 N - Instruções de Operação descarregar pdf (Página 25)

Dispose of the old oil properly (local oil disposal point).

The old oil must not be poured into the ground or drain-

age system, or mixed with other waste.

5. Release the hose clamp on the oil hose, so that the oil can

run out.

L Hydraulic oil

We recommend the following hydraulic oils for the hydraulic

cylinder:

¾ Aral Vitam GF 22

¾ BP Energol HLP-HM 22

¾ Mobil DTE 11

¾ Shell Tellus 22

¾ or equivalent

Do not use any other types of oil. The use of any other

type of oil will adversely affect the operation of the hy-

draulic cylinder.

6. Reconnect the oil hose.

7. Pour in the new hydraulic oil (6.0 litres) using a clean

funnel.

8. Screw the venting cap on again.

9. Fasten the casing.

Model ASP 81050

Type LS6T

Splitting force

80 N (8 t) ± 10 %

Log length 1025 mm

Log diameter min. 120 – max. 320 mm

Stroke 480 mm

Feed speed ca. 0,06 m/sec.

Return speed ca. 0,05 m/sec.

Hydraulic oil (max.) 6,0 litres

Hydraulic pressure 21 MPa (210 bar)

Electric motor performance (power consumption) P

= 3700 W S6 – 40%

Power supply Threephase 400 V 3~ 50 Hz, 10 A inert

Dimensions Length 930 x Width 830 x Height 1470 mm

Weight ca. 125 kg

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 95 96

Sem comentários

ATIKA ASP 8 N - Instruções de Operação Página 25