ATIKA ASP 5 Instruções de Operação descarregar pdf (Página 23)

Model ASP 5,5

Type ASP 5,5

Splitting force 55 kN (5.5 t) ± 10 %

Log length max. 1050 mm

Log diameter min. 100 – max. 300 mm

Stroke

≈ 500 mm

Feed speed ca. 0,06 m/sec.

Return speed ca. 0,13 m/sec.

Hydraulic oil (max.) 4,0 litres

Hydraulic pressure 20 MPa (200 bar)

Electric motor performance (power consumption) AC P

= 3500 W (S6-40%)

Threephase P

= 3000 W (S6-40%)

Power supply AC 230 V ~ 50 Hz, 16 A inert

Threephase 400 V 3~ 50 Hz, 16 A

Dimensions Length 740 x Width 500 x Height 1520 mm

Weight ca. 96 kg

Problem possible cause remedy

Logs are not being split properly

(insufficient splitting performance)

⇒ The log is not positioned correctly

⇒ The log exceeds the maximum dimensions

or the wood is too hard for the

performance of the machine

⇒ Splitting blade does not split log

⇒ Hydraulic pressure too low

⇒ Release rods bent (hydraulic tappet not

quite pressed in)

⇒ Incorrect connecting lead (longer than 10

m or too small cable cross-section)

⇒ Reposition the log correctly

⇒ Cut the log to the required dimensions

⇒ Sharpen splitting blade, check for burrs or

notches

⇒ Check the oil level and add more oil if necessary.

If the problem cannot be rectified, refer to the

manufacturer or other approved service centre.

⇒ Arrange for manufacturer or authorised company

to adjust the rods

⇒ Use the correct connecting lead

Splitting column moves unsteadily

or with strong vibrations

⇒ Air in the circuit

⇒ Splitting column not sufficiently lubricated

or oiled.

⇒ Check the oil level and add more oil if necessary.

⇒ Lubricate splitting column or oil with

environmentally friendly spray oil.

If the problem cannot be rectified, refer to the

manufacturer or other approved service centre.

Splitting column does not move

⇒ Hydraulic pump defective ⇒ To correct the problem, refer to the manufacturer

or other approved service centre.

Motor starts up but splitting

column does not move

⇒ Motor turns in wrong direction ⇒ Check the motor direction

Threephase: adjust the motor direction (s. page

18)

AC: To correct the problem, refer to the manu-

facturer or other approved service centre.

Motor will not start

⇒ No electrical power

⇒ 2-phase mode in threephase motor

⇒ Connection cable defective

⇒ Electric motor defective

⇒ Check the fuse.

⇒ Have fuse and lead checked by qualified

electrician.

⇒ Replace the connection cable or have it checked

by an electrician.

⇒ To correct the problem, refer to the manufacturer

or other approved service centre.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Comentários a estes Manuais

Sem comentários

ATIKA ASP 5 Instruções de Operação Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Rachadores de lenha ATIKA ASP 5